USER MANUAL

REMOVE THE CASE TO GET STARTED

By default your camera comes with the case placed, to start charging and configurating your camera you need to remove the case

We hihglly recomend to fully charche your camra before start using it this way will make sure the battery life will work correctly. You can use the USB cable to charge from the computer or the camera charger. The Led B on purpure (see BASICS picture) indicates that your camera is not fully charged, once the led B turn blue means your camera is fully charged.

Once your camera is fully charged you can place the memory MicroSD

To Turn ON and OFF just leave press for 3 seconds the MODE button located at the front of the camera, to turn it OFF leave press again for 4 second the same button.

TAKE VIDEO AND PHOTO

Once you tunr ON your camera this one will be automatically on VIDEO mode, the "video camera" icon in the top left corner indicates that the camera is on video mode, once here, you just need to press OK buttom and the camera will start recording video, to stop recording you just need to prees OK button again.

To change to PHOTO mode from VIDEO mode, you can press MODE button located at the front of the camera and the cmera will change to PHOTO mode, now you can press OK button and the camera will take pictures. If you press MODE buton again, from PHOTO mode you'll go to Galery PHOTO mode, here you can navigate with UP and DOWN buttons to see the photos that you took before.

Standar Photo Mode

To take pictures in standar Mode; Turn On your camera by presing and hold for 3 seconds the Mode buttom.

In standar Photo Mode you can easily take pictures by presing OK buttom, in this mode each time you press OK the camera will take a pictire.

The icon located at the left top corner on the screen indicates the Mode of standar pictures

Photo Galery

Once you're on standar photo mode you can press once MODE buttom and the camera will display your Photo Galery

Photo galery are the pictures you has taken. You can use the UP and Down Buttons to navigate your galery and see those pictures or videos.

Timer Photo Mode

In Timer Photo Mode you can set your Lumitem camera to take pictures automatically on certain periods of time. This will allow you to take pictures in a confortable way without being worried about pressing any button. This mode works great for those activities that require all of your attention or if you are your own photographer on any moment. Lumitem camera has 5 different modes of taking photos. Each one has different time shooting amounts so you can choose which one fits better for your interests.
To switch to capture photo mode you must go to “Setup” on your camera. To do this press the “mode” button as many times as necessary until you see the “Setup” menu, this one would be represented as a yellow gear displayed on the screen. Once here you can press OK button to acces to the diferents configuration options availables. Use the Mode buttom as many times neccesary to navigate the diferent options topics of the camera such as; PHOTO configurations, VIDEO CONFIGURATIONS, EXTRA configurations and GENERAL settings, once again to acces to one of those configurations, in this case PHOTO configurations press OK button and from here you can use up and down keys to navigate.
Go to Loop Timer and press OK, a sub menu with diferents options would be displayed on the screen, select the best option for your needs by pressing OK on any of those.
Now as soon as you start Taking Pictures the camera will take in the mode that you selected.

Burst Photo Mode

On burst photo mode your camera will take an amount of pictures in one second. This mode is great for high-speed activities. To change the capture photo mode go to “Setup” on your camera. To do this press the “mode” button as many times as necessary until you see the “Setup” menu, this one would be represented as a yellow gear displayed on the screen. Once here you can press OK button to acces to the diferents configuration options availables. Use the Mode buttom as many times neccesary to navigate the diferent options topics of the camera such as; PHOTO configurations, VIDEO CONFIGURATIONS, EXTRA configurations and GENERAL settings, once again to acces to one of those configurations, in this case PHOTO configurations press OK button and from here you can use up and down keys to navigate.
Go to Photo Burst and press OK, a sub menu with diferents options would be displayed on the screen, select the best option for your needs by pressing OK on any of those.
Now as soon as you start recording the camera will Take pictures as the mode that you selected previuslly.

Standar Video Mode

Each time you turn ON your camera this one will be automatically on Standar Video Mode. This mode allows you to take videoseassily pressing OK button to start recording and pressing again OK to stop

The "video camera" icon at the top left corner on the screen indicates that your camera is on video mode, the numbers next to the icon indicates the resolution configuration that the camera has. You can change this resolution configuration in the setUp menu. As soon as you press OK button on video mode the camera will start recording videos until you press OK buttom again to stop recording.

Loop Recording Mode

Loop recording mode allows you to record diferent videos from periods of time. This is great to manupulate after your memory and delete those moment that are no nessesary keeping instead thos that you want to save.

To change to Loop recording mode you can go to Setup on your camera, to do this press MODE button as meny times as necesarry until you see the SetUp menu, this one would be represented as a yellow gear displayed on the screen. Once here you can press OK button to acces to the diferents configuration options availables. Use the Mode buttom as many times neccesary to navigate the diferent options topics of the camera such as; PHOTO configurations, VIDEO CONFIGURATIONS, EXTRA configurations and GENERAL settings, once again to acces to one of those configurations, in this case VIDEO configurations press OK button and from here you can use up and down keys to navigate.
Go to Loop Recording and press OK, a sub menu with diferents options woul be display on the screen, select the best one for your needs by pressing OK on any of those.
Now as soon as you start recording the camera will record in loop mode as you selected.

SLOW MOTION MODE

Slow Motion Mode is a great options for those hight speed activities, LUMITEM camera can record in slow motion in order to have an amazing result on video without missing any part of the best moments.

In order to record videos on slow motion pres the mode buttom as many times as neccesary untill you see the icon "(--->visual icon)" displayed on the top left corner of the screen.


Now as soon as you start recording video this one woul be recorded in slow motion.
Frequency , Resolution and Video Formats

Your camera can record videos at diferents resolutions and frequency. The resolution of the video by default is 4K with 60FPS. However you can change this On set up menu youll see the option RESOLUTION this option allows you to shoose the best resolution for your needs.


Your camera record videos on MP4 format, if you have any prblem with this kind of file to displaying it on your computer please download the free desk app at: video format converter
FOR MORE INFORMATION OR ISSUES, PLEASE CONTACT:

Your camera can be conected to your devices such as phones or tablets by WIFI, this allows you to manipulate in real time your camera from your device and have acces to the media galery on the camera in order to download any picture or vide on your phone. download the free APP from your ANDROID or IOS AppStore:

goPlusCam

After you download the app turn ON your camera, on vide or photo mode press UP button. you will note that the led on the top on your camra start to relics on orange color, this mean the wifi on your camera is ready to conect to your device, also the camera will display on the screen the name of the wifi network and the passcode

Go to WI-FI settings on your phone and shoose the wifi networds that your camera provides and intruduce the passcode, make sure your phone is already conected to the wifi network.

Open the goPlusCam APP that you downloaded previuslly and press conect. Now you camera should be succesuffly conected to your device and you can control it from here or acces to the galery.

Copyright 2017 | lumitem.com